[1] 文爱民,刁秀永等,.搭建实验平台研究电子节气门控制策略[J].中国电机化学报,2015,36(5):180-183.
[2] PAUL G.GRIFFITHS.Embedded Software Control Design for an Electronic Throttle Body[D].Berkeley:University of Californla,2000.
[3] 陈宏羽.电子节气门控制系统开发及其算法研究 [D].长春:吉林大学,2016.
[4] 肖旺,耿仁强.电子节气门阀体结构设计与优化[J] .汽车工业研究,2017.2:56-59.
[5] 朱二欣.电子节气门控制系统的开发研究 [D].吉林:吉林大学,2005:11.
[6] 李宏超.发电机电子节气门的控制研究:[D].合肥:合肥工业大学,2017:20.
[7] 于洪洋.基于位置反馈控制的节气门控制系统研究:[D].吉林:吉林大学,2006.
[8] 汪珍珍.汽油机电子节气门控制方法研究:[D].重庆:重庆大学,2016:26.
[9] 麻友良,尹华敏.电控发动机电子节气门控制系统[J].汽车电器,2006(8):36-37.
[10] PAVKOVIC D,DEUR J,JANSZ M.Adaptive Control of Automotive Electronic Throttle[C]//Control Engineering Practice.2006:121-136.
[11] AL-Assadi S,Breitinger J A.Tuning An Electronic Throttle Controllers Using Computer-Aided Calibration Method[C]//SAE 2006 World Congress.Detroit,Michigan,USA:SAE International,2006.
[12] 郭宏志,陈虹,宋同好,等.嵌入CAN节点的汽车电子节气门仿真系统[J].系统仿真学报,2009,21(18):5 716-5 719.
[13] 郑太雄,杨斌,等.车联网环境下电子节气门全局快速滑模控制[J].仪器仪表学报,2014,35(10):2 356-2 364.
[14] DEUR J,PAVKOVIC D,PERIC N,et al.An Electronic Throttle Control Strategy Including Compensation of Friction and Limp-Home Effects[J].IEEE Transactions on Industry Applications,2004,40(3):821-834.
[15] PAVKOVIC D,DEUR J,JANSZ M,et al.Adaptive Control of Automotive Electronic Throttle[J].Control Engineering Practice,2006,14(2):121-136
[16] Bai R,Liu Y,Wang S.Fuzzy Sliding-Mode Control of the Electronic Throttle System[C]//Proceeding of the 11th World Congress on Intelligent Control and Automation.IEEE,2014:747-750.
[17] WANG C H,HUANG D Y.A New Intelligent Fuzzy Controller for Nonlinear Hysteretic Electronic Throttle in Modern Intelligent Automobiles[J].IEEE Transactions on Industrial Electronics,2013,60(6):2332-2345.
[18] 昝鹏,颜国正,于莲芝.基于自适应模糊PID控制的气动微型机器人系统 [J].仪器仪表学报,2007,28(9):1 543-1 547.
[19] 陈晓雷.神经网络自适应控制器仿真研究[D].山西:太原理工大学,2007.
[20] 王俊国.基于神经网络的建模方法与控制策略研究[D].武汉:华中科技大学,2004:10.
[21] YUAN X F,WANG Y N ,WU L H,et al .Neural Network Based Self-Learing Control Strategy for Electronic Throttle Valve[J].IEEE Transactions on Vehicular Technology,2010,59(8):3 357-3 765. |