journal6 ›› 2009, Vol. 30 ›› Issue (4): 65-68.
• 物理与电子 • 上一篇 下一篇
出版日期:
发布日期:
作者简介:
Online:
Published:
摘要:介绍了1种基于FPGA和DSP的高速数据采集系统的设计和实现,其FPGA采用Altera公司ACEX 1K系列的EPIK5OTC144_3器件,DSP芯片采用TI公司TMS320系列的TMS320C6713器件.该系统将A/D采样的数据送往FPGA,经过FPGA预处理后送到DSP,最终通过USB接口送到主控台,其系统的数据采集的实时速度最高可达到100 MB/s,适用于大部分的高速数据采集场合.
关键词: 高速数据采集, FPGA, DSP, AD9446
Abstract: The design and realization of a high-speed data acquisition system based on FPGA and DSP is introduced in the paper.The FPGA is EPIK5OTC144_3 which belongs to ACEX 1K serial and produced by Altera;while the DSP processor is TMS320C6713 which belongs to TMS320 serial produced by TI.The data acquired by ADC is transferred to FPGA,then transferred to DSP after being pre-processed by FPGA and finally to console via the interface of USB.The system’s real-time data acquisition rate is up to 100MBYTE/S,so it is applicable to most of the high-speed data acquisition occasions.
Key words: high-speed data acquisition, FPGA, DSP, AD9446
杨永东, 曾庆立. 基于FPGA+DSP的高速数据采集系统设计[J]. journal6, 2009, 30(4): 65-68.
YANG Yong-Dong, ZENG Qing-Li. Design of High Speed Data Acquisition System Based on FPGA and DSP[J]. journal6, 2009, 30(4): 65-68.
0 / / 推荐
导出引用管理器 EndNote|Ris|BibTeX
链接本文: https://zkxb.jsu.edu.cn/CN/
https://zkxb.jsu.edu.cn/CN/Y2009/V30/I4/65