journal6 ›› 2002, Vol. 23 ›› Issue (2): 34-37.
• 重点学科 • 上一篇 下一篇
出版日期:
发布日期:
作者简介:
Online:
Published:
摘要:用废铁屑为原料对电解锰生产废水进行处理,考察了铁屑用量、反应时间和废水pH值对Cr6+,Mn2+去除率的影响.实验结果表明,在铁屑用量为15%,废水pH值为4,常温下反应120 min的条件下,Cr6+,Mn2+的去除率在99.7%以上,总铬去除率达99.2%.同时,将实验结果用于工厂废水处理运行,效果良好,Cr6+的去除率为99.45%,Mn2+的去除率为95.53%.
关键词: 铁屑, 微电解, 废水
Abstract: The electrolytic mangan wastewater was processed by iron chipping.The factors of iron chipping amount, reaction time and the influence of wastewater pH on the purgation ratio of Cr6+,Mn2+ were investigated. The results show that under usual temperature when amount of iron chipping is 15%, wastewater pH is 4.00, reaction time is 120 min, Cr6+,Mn2+ and total chromium purgation ratio were 99.7% and 99.2%.when it was used to practice the treatment electrolytic mangan wastewater, purgation ratio of Cr6+,Mn2+ was 99.45% and 95.53%.
Key words: iron chipping, microelectrolysis, wastewater
欧阳玉祝, 沈扬, 李清平, 李建华, 许景明. 铁屑微电解法处理电解锰生产废水[J]. journal6, 2002, 23(2): 34-37.
OuYang-Yu-Zhu , SHEN Yang, LI Qing-Ping, LI Jian-Hua, XU Jing-Ming. Treatment of the Electrolytic Mangan Wastewater byIron Chipping Microelectrolysis[J]. journal6, 2002, 23(2): 34-37.
0 / / 推荐
导出引用管理器 EndNote|Ris|BibTeX
链接本文: https://zkxb.jsu.edu.cn/CN/
https://zkxb.jsu.edu.cn/CN/Y2002/V23/I2/34