journal6 ›› 2014, Vol. 35 ›› Issue (3): 64-68.DOI: 10.3969/j.issn.1007-2985.2014.03.014
• 机械与工程 • 上一篇 下一篇
李存鹏
出版日期:
发布日期:
作者简介:
基金资助:
安徽国防科技职业学院专业带头人资助项目（GFXY20121207）；安徽省模具设计与制造特色专业资助项目（2013TSZY087）
LI Cun-Peng
Online:
Published:
摘要：在曲柄滑块机构连杆和曲柄销之间附加偏心轮连杆，使得偏心轮在推动曲柄运动的同时，驱动行星轮机构传送驱动力到外部.通过对改良前后机构的动力特性分析与验证，发现改良过的曲柄滑块机构比传统的曲柄滑块机构有更大的输出扭矩.
关键词： 曲柄滑块机构, 动力特性分析, 偏心轮连接器
Abstract: Based on the slider-crank mechanism between the connecting rod was used and crank pin,additional eccentric connecting rod was used on institutional improvement,which made the eccentric wheel drive the crank movement while driving planetary gear transmission to the external driving force.Through the analysis of the dynamic characteristics of institutions before and after improvement,the improved slider-crank mechanism has a bigger output torque than the traditional slider-crank mechanism.
Key words: slider-crank mechanism, dynamic characteristics analysis, eccentric connector
李存鹏. 曲柄滑块机构改良设计及动态分析[J]. journal6, 2014, 35(3): 64-68.
LI Cun-Peng. Slider-Crank Mechanism Optimal Design and Dynamic Analysis[J]. journal6, 2014, 35(3): 64-68.
0 / / 推荐
导出引用管理器 EndNote|Ris|BibTeX
链接本文: https://zkxb.jsu.edu.cn/CN/10.3969/j.issn.1007-2985.2014.03.014
https://zkxb.jsu.edu.cn/CN/Y2014/V35/I3/64
